Product Features

The MC8000UE-S1/S4 ADSL Router utilizes the latest ADSL enhancements and router

technologies to provide a robust Internet gateway suitable for most small to medium sized offices.

  ADSL Compliance

  Compliant with ADSL standards

  Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards

  Splitterless ITU G.lite (G.992.2) specification

  ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)

  DMT modulation and demodulation

  Full-rate adaptive modem

  Maximum downstream rate of 8 Mbps

  Maximum upstream rate of 1 Mbps

  Tone detection for low power mode

  Supports splitterless ADSL implementation

  Supports Dying Gasp

  ATM Protocols

  WAN mode support: PPP over ATM (RFC 2364) and PPP over Ethernet (RFC2516)

  LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and

Classical IP over ATM (RFC 1577)

  ATM Forum UNI 3.1/4.0 PVC

  Up to 8 VCs (Virtual Circuits)

  ATM SAR (Segmentation and Reassembly)

  ATM AAL5 (Adaption Layer type 5)

  OAM F4/F5

  Bridge Mode

  Ethernet to ADSL self-learning Transparent Bridging (IEEE 802.1D)

  Supports up to 128 MAC learning addresses

  Router Mode

  IP routing–RIPv2

  Static routing

  DHCP (Dynamic Host Configuration Protocol) Server and Client

  NAPT (Network Address and Port Translation)

  NAT (Network Address Translation)

  ICMP (Internet Control Message Protocol)

  Security

  User authentication for PPP

  PAP (Password Authentication Protocol)

  CHAP (Challenge Authentication Protocol)

  Password protected system management

  Ethernet interface

  Compliant with IEEE 802.3 standard

  10/100 Mbps auto selection

  HTTP Web-based management

  Firmware upgrade via FTP

  Customizable Web pages

  WAN and LAN side connection statistics

  Configuration of static routes and Routing table

  Configuration of NAT/NAPT

  Password protected access

  Selection of Bridge or Router Mode

  PPP user ID and password

  Configuration of VCs (Virtual Circuits)