Port Forwarding:

 

You must open ports on your router to allow incoming traffic while using eMule.

eMule uses three ports*:

·  4662 (TCP)

·  4672 (UDP)

·  4711 (TCP)

First Steps: Open your web browser and enter the IP address of your router (10.0.0.2). Enter username and your password.

 

Second Step: Go to Virtual Server under Configuration.

 

 

Third Step: Create new rule

1. Input required Public Port 4662 (TCP), 4711 (TCP) and 4672 (UDP) and Private Port which is normally as same as public. 
2. Enter the IP address of the computer you want to run E-mule from.
3. Click ‘Add This Setting’.

 

 

Fourth Step: Click Save Setting, then modem will be rebooted.