Port Forwarding:

In order to connect to a pcAnywhere host that is behind a router, you must open the following ports:

• 5631 (TCP)
• 5632 (UDP)

Note: If you are using a computer behind a router and connecting to a pcAnywhere host, you do not have to configure the router. If the host you are connecting to is behind a router, then that router must have the required ports (5631-5632) opened.

 

First Steps: Open your web browser and enter the IP address of your router (10.0.0.2). Enter username and your password.

 

Second Step: Go to Virtual Server under Configuration.

 

 

 

Third step: Create new rule

1. Input required Public Port ‘5631’ and Private Port which is normally as same as public port in here is ‘5631’. 
2. For Port Type. Select TCP
3. Enter the IP address of the computer you want to run pcAnywhere from (host).
4. Click ‘Add This Setting’.

 

 

Fourth step: Repeat Step Three but,

1. Private and Public Port: 5632
2. Port Type: UDP

Last step: Click Save Setting, then modem will be rebooted.